Bio Medical
Chillers
|
Bio Medical Chillers- If you are upgrading,
replacing or planning a new GE or Siemens MRI scan system,
Legacy Chillers has MRI chiller solutions available for GE
and Siemens. Our pre-engineered MRI chiller solutions are
designed for the most demanding scanning environments. If
you are also in need of engineering, or installation
services, Legacy has the skills and resources to help ensure
a successful turnkey project in all major U.S. markets.
-
Medical
MRI Chillers
-
Operating room air conditioning Chiller
- C.
A. T. Scan Chillers
-
X-ray developer Chiller
-
Hypothermia Blankets Chiller
- Lab
Testing Chiller
Chiller System Solutions Table of Contents
Legacy
Chiller Systems has a large selection of chillers to meet
your needs. We offer many features and options for both the
air-cooled and water-cooled chiller systems.
- The Air-Cooled PACT with integrated tank
Available in sizes from 1 to 15 tons, separate stainless
steel system and process pumps, integrated tank section,
316 stainless evaporator, Copeland Scroll compressor (s),
dozens of standard features and many available options.
- The Air-Cooled PAC Available in sizes from 1
to 50 tons, low profile ideal for roof mount
installation, lightweight, 316 stainless evaporator,
Copeland Scroll compressor (s), dozens of standard
features and many available options.
- The Air-Cooled PAC-Semi Available in sizes
from 1 to 90 tons, low profile ideal for roof mount
installation, Copeland Semi-hermetic compressor (s),
dozens of standard features and many available options.
- The Water-Cooled PWC - Available in sizes from
1 to 20 tons, compact cabinet, light weight, 316 stainless
evaporator, Copeland Scroll compressor (s), dozens of
standard features and many available options.
- The Water-Cooled PWCT with integrated tank -
Available in sizes from 1 to 20 tons, separate stainless
steel system and process pumps, integrated tank section,
316 stainless evaporator, Copeland Scroll compressor (s),
dozens of standard features and many available options.
- Auxiliary Tank Sections Available in sizes
form 135 to 600 gallons, stainless or polypro, completely
enclosed, digital supply and return water temperature
gauges, stainless steel factory mounted system pump.
- Split condenser chiller models are also available!
The Air-Cooled Split ES - 1-20 tons (same as PAC) with a
split condenser
The Air-Cooled Split EST - 1-20 tons (same as PACT) with a
split condenser
Standard Features (All Models)
- Remote condenser section
- Microprocessor controller
- STAINLESS STEEL brazed plate evaporator with ½
insulation, and secured in a steel bracket
- Scroll compressor with crankcase heater
- Suction accumulator
- Water flow switch
- Hot gas by-pass capacity control
- 24V control transformer
- Direct drive condenser fan motor
- Rust resistant, high CFM, aluminum
- Condenser fan blade
- Condenser (s): copper tube / aluminum fin
- Compressor motor contactor
- Condenser motor and control circuit fusing
- Hard start kit (single phase units only)
- Painted galvanized sheet metal cabinet
- ½ insulation on all water and refrigerant lines
- Liquid line drier, sight glass, solenoid, TEV
- Full refrigerant charge from factory
Additional Features on Tank Models Only
- STAINLESS STEEL storage tank with ½ insulation
- Fused STAINLESS STEEL re-circulation pump for tank
operation with ball valve and cleanable strainer
- Tank pressure relief valve, vent and drain connections
AVAILABLE OPTIONS (All Models)
- 4 year extended compressor warranty
- Casters (factory mounted)
- 115 volt (rain tight) service outlet
- Fused disconnect
- Phase monitor
- Compressor fusing
- Fan cycle control on Pac90 & 120 units only (+40 F)
- Variable fan speed control (+20 F)
- Flooded condenser with receiver / head pressure control
(-20 F)
- Heated flooded condenser with receiver / head pressure
control (-20 F)
- Factory installed evaporator heat tape freeze protection
thermostatically controlled
- Fused STAINLESS STEEL system process pump
- Dual system pump with manual changeover
- Dual system pump with auto changeover
- Low flow bypass valve
- Gold finned condenser coil (coastal protection)
- Semi-hermetic compressor
- Shell and tube chiller barrel
- Water flow meter
- Auto city water make up solenoid
- Auto city water changeover panel
- Auto city water changeover panel with 5 micron filter
- Special piping for de-ionized and reverse osmosis water
systems
- Blower type condenser fan (forward curve) 12S to 60S
Additional Available Options on Tank Models Only
- Storage tank sight glass
- Tank low liquid level indicator with dry contacts
|
|
|
|
